WELDING FABRICATION TABLES CANADA

OUR FABRICATION TABLES ARE DESIGNED AND LASER CUT IN HOUSE TO HIGH QUALITY STANDARDS AND TOLERANCES, FITMENT IS PERFECT EVERYTIME, NO MATTER YOUR PROCESS IF ITS MIG TIG OR ARC WELDING THESE TABLES WILL SUIT YOUR FABRICATION NEEDS. 

ALL OF OUR TABLES ARE CUT FROM .250" THICK HRPO PLATE WITH THE ABILITY TO UPGRADABLE YOUR TABLE TOP FROM .250" THICK UP TO .375" OR .500" THICK FOR AN ADDITIONAL COST.

GENERALLY CUSTOMERS THAT REQUIRE HEAVIER TOP PLATES ARE WORKING ON HEAVY PROJECTS OR THAT REQUIRE EXTREME CLAMPING PROPERTIES. 

FOR GENERAL FABRICATION SHOPS OR HOBBYISTS THAT BUILD HOT RODS, MOTORCYCLES, CHASSIS COMPONENTS ETC ONLY REQUIRE .250" THICK TOP. 

BUT THE OPTION IS THERE FOR ANY CUSTOMER THAT DECIDES THEY WOULD LIKE TO GO WITH A THICKER TOP.

OUR TABLE FEATURES ARE AS FOLLOWS:

 - HOLE CENTERS ARE .630" DIAMETER ON 2.0" CENTERS AS PER INDUSTRY STANDARDS SO YOU CAN USE A WIDE RANGE OF TOOLING FROM ANY OTHER COMPANY OR USE OUR TOOLING. 

 - 6" THICK IN HEIGHT 

 - INTERNAL STIFFNER SYSTEM CENTERS ARE 8.0" TYPICAL, SO YOUR ALWAYS CLAMPING IN AN 8"X 8" SQUARE AREA FOR MAXIMUM CLAMPING.

 - OUR TABLES ARE GENERALLY SOLD IN FLAT PACK SYSTEM AND THE CUSTOMER ASSEMBLES AND WELDS THEM TOGETHER, MOST CUSTOMERS REALLY ENJOY THIS EXPERIENCE AND HELPS TO GET FAMILIAR WITH THE ASSEMBLY OF THE TABLE. 

COMPLETE WELDED TABLES ARE AN OPTION FOR EXTRA COST 

 - THE TABLES ARE SOLD WITH A COMPLETE TOP ASSEMBLY WHICH INCLUDES THE TABLE TOP, INTERNAL STIFFNER SYSTEM, AND LOCKING CORNER BOTTOM PLATES THAT HAVE THE OPTION TO BOLT ON OUR LEG KITS AT ANY TIME!

 - LEG KITS ARE SOLD SEPERATELY AND COMPRISE OF 2"X 2" OR 3"X3" HSS TUBE LEGS WITH AN UPPER BOLTING PLATE, LOWER WELDED PLATE WITH ETCHED HEX DETAIL FOR AN ADJUSTING NUT THAT WELDS INSIDE THE TUBE SO YOU CAN THREAD A .750" OR 1.0" BOLT IN FOR ADJUSTABILITY FOR UNEVEN FLOORS.

 - LEG SIZE IS DEPENDANT ON TABLE SIZE

TABLE SIZES AVAILABLE IN INCHES AND PRICING IN CAD : 

24 X 36 - $799.00

24 X 48 - $1099.00

36 X 36 - $1099.00

36 X 48 - $1449.00

36 X 60 - $1550.00 

48 X 48 - $1599.00

48 X 60 - $1950.00

48 X 96 - $2750.00

36 X 118 - $3299.00

60 X 118 - $3650.00

2X2" - 4PC LEG KIT $299.00 TYPICALLY USED FOR 24X36 TABLES UP TO 24X48

3X3" - 4PC LEG KIT $379.00 TYPICALLY USED FOR TABLES UP TO 48X60

3X3" - 6PC LEG KIT $429.00 TYPICALLY USED FOR LARGE TABLES 48X96 TO 60X118

12X12X6" ANGLE PLATES $119.00

6X6X4" ANGLE PLATES $65.00 EA

VICE MOUNT $149.00EA CAN BOLT ON UP TO 10" VICE (NOTE VICE NOT INCLUDED)

MOST TOOLING IS IN STOCK AND READY TO GO

TABLES ARE TYPICALLY LASER CUT AND READY TO PICKUP WITHIN 3-5 BUSINESS DAYS

CALL OR EMAIL TO PLACE YOUR ORDER!!

WELDING CANADA 

OUR FABRICATION TABLES ARE DESIGNED AND LASER CUT IN HOUSE TO HIGH QUALITY STANDARDS AND TOLERANCES, FITMENT IS PERFECT EVERYTIME, NO MATTER YOUR PROCESS IF ITS MIG TIG OR ARC WELDING THESE TABLES WILL SUIT YOUR FABRICATION NEEDS. 

ALL OF OUR TABLES ARE CUT FROM .250" THICK HRPO PLATE WITH THE ABILITY TO UPGRADABLE YOUR TABLE TOP FROM .250" THICK UP TO .375" OR .500" THICK FOR AN ADDITIONAL COST.

GENERALLY CUSTOMERS THAT REQUIRE HEAVIER TOP PLATES ARE WORKING ON HEAVY PROJECTS OR THAT REQUIRE EXTREME CLAMPING PROPERTIES. 

FOR GENERAL FABRICATION SHOPS OR HOBBYISTS THAT BUILD HOT RODS, MOTORCYCLES, CHASSIS COMPONENTS ETC ONLY REQUIRE .250" THICK TOP. 

BUT THE OPTION IS THERE FOR ANY CUSTOMER THAT DECIDES THEY WOULD LIKE TO GO WITH A THICKER TOP.

OUR TABLE FEATURES ARE AS FOLLOWS:

 - HOLE CENTERS ARE .630" DIAMETER ON 2.0" CENTERS AS PER INDUSTRY STANDARDS SO YOU CAN USE A WIDE RANGE OF TOOLING FROM ANY OTHER COMPANY OR USE OUR TOOLING. 

 - 6" THICK IN HEIGHT 

 - INTERNAL STIFFNER SYSTEM CENTERS ARE 8.0" TYPICAL, SO YOUR ALWAYS CLAMPING IN AN 8"X 8" SQUARE AREA FOR MAXIMUM CLAMPING.

 - OUR TABLES ARE GENERALLY SOLD IN FLAT PACK SYSTEM AND THE CUSTOMER ASSEMBLES AND WELDS THEM TOGETHER, MOST CUSTOMERS REALLY ENJOY THIS EXPERIENCE AND HELPS TO GET FAMILIAR WITH THE ASSEMBLY OF THE TABLE. 

COMPLETE WELDED TABLES ARE AN OPTION FOR EXTRA COST 

 - THE TABLES ARE SOLD WITH A COMPLETE TOP ASSEMBLY WHICH INCLUDES THE TABLE TOP, INTERNAL STIFFNER SYSTEM, AND LOCKING CORNER BOTTOM PLATES THAT HAVE THE OPTION TO BOLT ON OUR LEG KITS AT ANY TIME!

 - LEG KITS ARE SOLD SEPERATELY AND COMPRISE OF 2"X 2" OR 3"X3" HSS TUBE LEGS WITH AN UPPER BOLTING PLATE, LOWER WELDED PLATE WITH ETCHED HEX DETAIL FOR AN ADJUSTING NUT THAT WELDS INSIDE THE TUBE SO YOU CAN THREAD A .750" OR 1.0" BOLT IN FOR ADJUSTABILITY FOR UNEVEN FLOORS.

 - LEG SIZE IS DEPENDANT ON TABLE SIZE

TABLE SIZES AVAILABLE IN INCHES AND PRICING IN CAD : 

24 X 36 - $799.00

24 X 48 - $1099.00

36 X 36 - $1099.00

36 X 48 - $1449.00

36 X 60 - $1550.00 

48 X 48 - $1599.00

48 X 60 - $1950.00

48 X 96 - $2750.00

36 X 118 - $3299.00

60 X 118 - $3650.00

2X2" - 4PC LEG KIT $299.00 TYPICALLY USED FOR 24X36 TABLES UP TO 24X48

3X3" - 4PC LEG KIT $379.00 TYPICALLY USED FOR TABLES UP TO 48X60

3X3" - 6PC LEG KIT $429.00 TYPICALLY USED FOR LARGE TABLES 48X96 TO 60X118

12X12X6" ANGLE PLATES $119.00

6X6X4" ANGLE PLATES $65.00 EA

VICE MOUNT $149.00EA CAN BOLT ON UP TO 10" VICE (NOTE VICE NOT INCLUDED)

MOST TOOLING IS IN STOCK AND READY TO GO

TABLES ARE TYPICALLY LASER CUT AND READY TO PICKUP WITHIN 3-5 BUSINESS DAYS

CALL OR EMAIL TO PLACE YOUR ORDER!!

WELDING CANADA